Tailor made solutions according to your application.
SGM manufactures both EM and EPR electromagnets for the slab and blooms handling. The recommendation of choosing the EM or the EPR magnet is based on possible high temperatures of the slabs and/or on safety requirements of the working environment.
SGM manufactures both EM and EPR electromagnets for these products handling. For hot applications and intensive duty cycles, typically at the exit of the caster, SGM offers the proprietary Convection Electro Lifting Magnet.
SGM manufactures both EM and EPR electromagnets for plates handling. EPR solutions are only for single plates or limited quantities of multiple thin plates.
EPR solutions are suitable for cold rolled coils and annealing furnace operations with coils in an eye vertical position. EM solutions also suitable for hot rolled coils.
The SGM solution is a substantial progress compared to the “C” hooks. The handling operation of wire coils can be carried out by a single operator from the crane cabin or by remote control.
Reinforced constructions bars ›
SGM manufactures EM for the re-bars handling. The EM solution is much faster and safer than chains or slings, in addition to ensuring a greater amount to handle.
SGM designs and builds specific magnets for this application taking into account the complete range of loads to be handled (section, length, weight, temperature).
The SGM Electro magnets designed for this application are of compact construction, thus limiting the overall height of the equipment. The use of magnets can reduce or significantly eliminate the damage to the pipes during handling.
Electro Permanent magnets for the handling of rails. Irrelevant residual magnetism (welding, inductive quality controls, …). Absolute safety is guaranteed because the lifting force of SGM Electro Permanent magnets is autonomous.
