Billets, rough beams, bars
SGM manufactures both EM and EPR electromagnets for these products handling. For hot applications and intensive duty cycles, typically at the exit of the caster, SGM offers the proprietary Convection Electro Lifting Magnet.
These SGM Electro magnets have been developed and manufactured to meet the high mechanical and electrical requirements specific for this type of application.
The winding made of anodized aluminum contributes to a large increase in the duty cycle and its service life especially in the presence of loads up to 600/650 °C.
The SGM electro magnets are designed and sized in all their mechanical and electrical aspects in order to offer the proper response to this very demanding application, often characterized by severe mechanical shocks, high duty cycles and possible high Temperatures.
The longer life and performance of these magnets may be compromised by hot applications and intense work cycles.
SGM has therefore designed its special convective electromagnets that are able to dissipate heat thanks to their design and consequently increase the working cycle and the durability of the magnets.
The lifting force of the Electro permanent magnets is independent from external energy sources = no accidental drops of the load as a result of power failure or cable interruption.
The lifting force of the Electro permanent magnets is constant in time = no accidental drops of the load as a result of a reduction on magnet lifting force.
Electro-permanent magnets are recommended for locations where accidental sudden interruptions of main electrical power may occur.
